Mohawk
Mohawk TP-26 / TP-30 Two-Post Lift
26,000 / 30,000 lb Two-Post Truck Lift
26,000 LBS. / 30,000 LBS. CAPACITY
Contact for Pricing
When it comes to strength, safety, and serviceability , the Mohawk TP-26 and TP-30 two-post lifts stand in a league of their own. Designed to handle vehicles up to 30,000 lbs. , these industry-leading lifts are engineered for reliability, long-term performance, and shop efficiency . Whether you're servicing medium-duty fleet trucks or full-size utility vehicles, Mohawk’s rugged lift design delivers unmatched stability and access
26,000 lbs. / 30,000 lbs.
Capacity
6' under arm
Rise Height
135 seconds
Full Rise
5 HP 208-230v or 440-480v 3ø
Power
Overview
Crafted from 7″ wide by 1″ thick forklift mast channel steel —not formed sheet metal—the TP-26 and TP-30 deliver the kind of durability that lasts for decades . Each lift is surface-mounted, eliminating the need for in-ground installation, tanks, or disruptive excavation. This not only simplifies setup but makes maintenance more accessible.
Specifications
| Specification | TP-26 / TP-30 Two-Post Lift |
|---|---|
| Lifting Capacity | 26,000 lbs. / 30,000 lbs. |
| Lifting Height | 6' under arm |
| Lifting Speed | 135 seconds |
| Overall Width (adjustable) | 15' (wider base model 17’) |
| Column Height | 11' |
| Width Between Posts | 12’ |
| Arm Pad Height | 7” |
| Lift Pad Height @ Full Rise w/Adaptors | 7’ 5” |
| 5” Frame Adaptors (stackable) | 4 included as standard equipment |
| 7 1/2” Frame Adaptors (stackable) | 4 included as standard equipment |
| 10” Frame Adaptors (stackable) | 4 included as standard equipment |
| Synchronization | Hydraulic fluid displacement using no chains, cables, or overhead obstructions |
| Mechanical Safety Locks | Multi-position, interlocked redundant safety systems |
| Hydraulic Safety Systems | Automatic; all position |
| Swing Arm Restraints | Automatic upon ascent |
| Cylinders | 2 (1 per column) |
| Drive System | #BL-848 leaf chain routed over cylinder |
| Carriage Bearings | (16) 5” (12.7 cm) diameter (8 per carriage) Double sealed self lubricating |
| Side Load Bearings | (8) 5” (12.7 cm) diameter (4 per Carriage) Double sealed self lubricating |
| Motor Rating | 5 HP 208-230v or 440-480v 3ø |
| Overhead Hydraulic Line Height | 16’ Standard (adjustable to accommodate any height ceiling or routed in-floor) |
| Concrete Floor Requirements | 4000 psi (27579.02 kPa) |
| Anchoring System (included) | 12” floor: (18) 1” x 10” Wej-it bolts, 8” floor: (28) 1” x 8” Wej-it bolts |
| Floor Access Between Posts | Clear and unobstructed |
| Weight | 8,800 lbs. / 9,300 lbs. |
| Warranty | 25 years structural, 10 year mechanical, plus limited lifetime cylinder seal warranty |
| Arm Height @ Full Rise | 6’ 7” |
| Width Between Carriage | 9’ 9” |
| Wide Base | TP-26/30 WB: 8” of 4000 psi concrete |
| Standard Base | TP-26/30: 12” of 4000 psi concrete |
Specifications published by the Mohawk factory and subject to change. Source: mohawklifts.com.
Related Products
Mohawk TP-16 / TP-18 Two-Post Lift
Two-Post Automotive Lift
LMF-12: 12,000 LBS. | TP-16: 16,000 LBS. | TP-18: 18,000 LBS. CAPACITY