TEC 8000 WRA Storage Lift
8,000 lb Wide-Body Four-Post Storage Lift
8,000 LB CAPACITY · WIDE FRAME FOR SPORTS CARS · RED COLUMNS
Products / Storage & Home Lifts
TEC
TEC 9000XH Storage Lift
9,000 lb Extended-Height Four-Post Lift
9,000 LB CAPACITY · 85" LIFTING HEIGHT · 11 LOCKING POSITIONS
Available to Buy Online
Call For Availability
The TEC 9000XH is our heaviest four-post lift — 9,000 lb capacity, an 85″ lifting height and industry leading runway length and drive-thru width. Cable driven with slack cable safety, single point manual lock release and eleven locking positions, it handles the largest trucks and SUVs and doubles as serious storage.
9,000 lbs.
Capacity
85"
Lifting Height
11
Locking Positions
115V – 20 Amp / 1PH
Power
Why Choose a TEC 9000XH Lift?
01
Built for Heavier Vehicles
Built with high-quality materials, TEC 9000XH lifts are engineered to withstand the largest vehicles. These four posts lift up to 9,000 lbs.
02
Advanced Safety Features
Safety is our top priority. TEC 9000XH lifts are equipped with state-of-the-art safety mechanisms, including automatic locking systems and overload protection, to keep you and your vehicles secure.
03
Versatile Applications
Whether for routine maintenance, repairs, or storage, our lifts cater to a wide array of vehicles, from compact cars to larger SUVs and trucks.
04
User-Friendly Design
With intuitive controls and easy setup, these lifts are designed for professional mechanics and DIY enthusiasts. Enjoy hassle-free operation and maintenance.
05
Space-Saving Solutions
Maximize your workspace with TEC 9000XH lifts. Their compact design allows for efficient use of space — even for heavier vehicles, they are ideal for both small garages and large commercial workshops.
Features
- Industry leading runway length and drive-thru width
- Cable driven
- Single point manual lock release
- Adjustable locking positions
- Slack cable safety
- Steel approach ramps
- Great for storage and/or general commercial service
Included with Every 9000XH Lift
Included
Caster Kit with Poly Wheels
Included
Jack Tray
Included
3 Drip Pans
Specifications
| Specification | TEC 9000XH |
|---|---|
| Lifting Capacity | 9,000 lbs. |
| Lifting Height | 85" |
| Overall Length w/ Ramps | 239" |
| Overall Length w/o Ramps | 197" |
| Overall Width | 123" |
| Overall Width w/ Power Unit | 134.5" |
| Approach Ramp Length | 37" |
| Runway Tread Width | 20" |
| Runway Length | 188.5" |
| Runway Height | 4.80" |
| Column Height | 97" |
| Clearance between Columns | 111.5" |
| Clearance between Runways | 39.5" |
| Outside Runway to Outside Runway | 79" |
| Clearance Under Runways | 81" |
| Drive-Thru Width | 99" |
| Locking Positions | 11 |
| Lifting Speed | 90 sec. |
| Power | 115V – 20 Amp / 1PH |
| Ship Weight | 2,354 lbs. |
Specifications are taken from the TEC 9000XH Series brochure and are subject to change.
Dimensions
Site Requirements
Overhead Obstructions
The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines etc.
Floor Requirements
Visually inspect the site where the lift is to be installed and check for cracked or defective concrete. This lift must be installed on a solid level concrete floor with no more than 2 degrees of slope. A level floor is suggested for proper installation and level lifting. If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab. This lift is designed to be installed on a minimum of 4" thick, 3000psi, steel reinforced concrete. Do not install this lift on asphalt, wood, or any other surface other than described. This lift is only as strong as the foundation on which it is installed.
Anchoring
This lift does not require bolting to the floor. If you choose to anchor the lift to the floor, follow the detailed instructions in the manual and the criteria above.
Not sure which lift fits?
Answer 4 quick questions about your cars and garage, or compare all 7 storage & home lifts side by side.
